Problem: Keyboard type extra letters

Problem: Keyboard type extra letters

Possible Solution:

The keyboard circuit has been short maybe because of moist or some liquid .

1.Open the keyboard and clean it from inside, use alcohol in cleaning process.
2.If the problem is still present, I sugget to replace your keyboard to avoid
complication on the computer.

Problem: Epson Stylus CX6600 All-In-One InkJet Printer only print yellow

Problem: Epson Stylus CX6600 All-In-One InkJet Printer only print yellow

Possible Solution :

1. Check the cartridge of your printer if it still
capable or having a sufficient ink to handle printing
2.If yes, purge your cartridge and run a maintenance page
3.Wipe the head of the cartridge on a wet cloth to remove some clogs.
4.And clean the tab circuit of the cartridge.

Problem: Printer won't print and can't delete the printer

Problem: Printer won't print and can't delete the printer

Possible Solution: This a communication problem between the printer and computer or the
transfer of file.
1.Check the cable connecting your printer and your PC if it's working properly.
2.Restart your computer and then, log the computer in
administrator mode and after that, uninstall the printer
driver and, in order to install another driver you need to restart you PC again.

Problem: The printer is not communicating with the computer.

Problem: The printer is not communicating with the computer.

Possible Solution:1. Transfer the cable connecting to the printer to the other slot on the computer.
2. Restart your computer and yoor printer.
3. Uninstall the printer driver and then restart your computer again after the restart install the printer driver.
4. here you go, it's working.

Problem : Replace a new cartridge and now the printer won't print at all.

Problem : Replace a new cartridge and now the printer won't print at all.

possible solution :
1.First unplug and plug on the printer by pulling the power cord then on the printer again.
2.if nothing happens, Re-insert your cartridge.

Problem: Ink and paper lights are blinking red at the same

Problem: Ink and paper lights are blinking red at the samePossible solution:

There are two possible solution to that problem, firmware issue or a mechanical.
in a firmware issue: your printer being triggered in the operation of sensing paper and ink, it can only saw low ink and no paper status at the tray.
and in the mechanical side, there is a problem on the sensing devices maybe they can only saw low ink and no paper status on the printer.

Problem: The printer only print one color

Problem: The printer only print one color

Possible solutions:

1.Clean the tab circuit of your cartridge using wet clean cloth becuase some of the cartridge tab will fill with ink that cause some loss connection.
2.Wipe the head of the cartridge containing nozzles on a wet cloth(to remove clogs covering the nozzles)
3.If the cartridge have a low ink pls refill or replace a new one.
4.Perform a maintenance forge to the heads,
5.print a maintenance page.